The principle and advantages of leaf spring structure
2022-07-12
Usually at this time the axle and frame will be against each other. Once the distance between the axle and the frame becomes farther, the pressure on the leaf spring structure will become smaller, and the corresponding deformation will become smaller or even reversed. Compared to the roll ears of the main piece, it is thin and heavily stressed. At the same time, because we want to reduce the force of the main piece of roll ear, the second piece is also generally made into a roll ear, and then wrapped around the main piece of roll ear.
leaf spring
In addition, if we want to allow each piece to slide relative to each other when elastically deformed, we need to leave a relatively large gap between the two parts of the main piece, the roll ear and the wrap ear. In addition, there are some leaf spring structural parts such as rubber support pads, which are not made into roll ears in the suspension, but instead use other support or connection methods.
The steel plate in the leaf spring structure is flat and rectangular, the steel plate is stacked together, and the chassis is supported by springs. One side uses a pin to install it with the hanger, and the other side uses a lifting lug to connect it with the girder. This structure allows the spring to expand and contract. Now this structure is used on some non-load-bearing bodies, such as off-road vehicles.
Contact Info
Add: Factory No.1, No.66, Qianma Industrial Concentration Zone, Zhuze Town, Liyang City, Changzhou City, Jiangsu Province, China 213300
Follow Us
Copyright© 2022 Jiangsu Fangtan Vehicle Parts Co., Ltd. Powered by www.300.cn
This website already supports IPV6 SEO
